AP/120-8 Level matching module

1. Purpose

1.1 The TM120 level matching module (hereinafter AP/120-8) is intended for matching the levels of the physical interfaces of the AP-4-8 controller and the TM120 telemechanics modem at power facilities.

2. Technical specifications

2.1 The module has 8 independent channels of physical interface coordination, which allows you to connect two AP-4-8 controllers with the TM120 protocol to the board for operation via a modem.

2.1 Design parameters:

plastic case, in which AP/120-8 is installed. Mounting of the case on a 35 mm DIN rail. Degree of mechanical protection — IP44;
external connections through detachable terminal blocks «under the screw» from the top of the case. Wire cross-section (except PE conductor) — 0.25 — 2.5 mm²;
overall dimensions 165 x 125 x 35 mm (L x W x D). Weight — 0.150 kg.

2.6 Operating conditions:

Operating temperature range from minus 40 to 90 C°.
Relative humidity up to 85% at a temperature of 35 C° without moisture condensation.
Installed in rooms without increased danger.

3. Delivery set

Module AP/120-8 in a housing with a set of corresponding connector parts — 1 set.
Technical data sheet — 1 copy.
Packaging

Made in Ukraine